Series-connected high-frequency noise filter available from 1/4 Amp PCB mount to 1,200 Amp 3-phase hard-wired. Ideal for those applications where internally generated noise and transients are of concern. Typical applications include industrial, medical, and telecommunications equipment. DC options available.
The original Active Tracking® Filter provides the industry’s best IEEE Category “A” protection (most commonly occurring transients). Typically reduces normal mode transients to +/– 5 volts
Non-degrading, series filter technology for total durability
Built to meet your unique requirements. Available in a multitude of voltage, phase, and packaging configurations
10-year warranty

Input Voltage

  120 VAC Models
0–150 VRMS
  240 VAC Models
0–275 VRMS
  480 VAC Models
0–520 VRMS
Line Frequency
50/60 Hz
(400 Hz Available)
Transient Attenuation Response Time
  Instantaneous
Mean Time Between Failure (MTBF)
  Greater Than 100,000 Hours (MIL 217F)
Packaging
Single-phase units through 30 Amps housed in black, high-impact plastic case, vacuum impregnated magnetics, epoxy encapsulated; single phase greater than 30 Amps, 480 VAC, and three phase units housed in NEMA 12 enclosures
Operating Temperature
  –40ºC to +45ºC
  Derate Linearly to 60% at +70ºC
Load Surge Current Rating
  10 mSec
5 x Nominal
  1 sec
3 x Nominal
  5 sec
2 x Nominal
Safety Approvals
  UL 1283 Listed or Recognized
  CSA
Typical Islatrol® Test Results
 
IEEE Category A Ringwave 6 kV, 200A, 100 kHz
IEEE Category B Ringwave 6 kV, 500A, 100 kHz
 
Normal Mode
Normal Mode
I-100
6.0
6.2
I-101
5.5
6.2
I-102
3.6
3.8
I-105
3.6
3.8
I-107
3.2
3.5
I-115
2.8
3.0
I-120
1.0
1.2
I-130
1.4
2.0
I-200
5.2
5.5
I-201
5.1
5.5
I-202
3.4
3.6
I-205
2.4
2.6
I-207
3.6
3.8
I-215
3.0
3.2
I-230
3.0
3.6

Note: All measurements in volts. IEEE test results with no AC applied. Normal mode—L-N or L1-L2.
Transient Reduction
Minimum of 40 dB from 50 kHz through 50 MHz. Attenuation is greater than 50 dB to the surge withstand capability ringwave test IEEE C62.41, Category “A” and “B”
Load Regulation
  Better than 1% from no load through full load

SINGLE-PHASE MODELS

120 VAC Models with Barrier Strip at Input & Output / with Wire Leads at Input & Output
MODEL
RATED OUTPUT (AMPS)
CASE DIM. (in.)
A x B x C
MOUNTING FLANGE DIM.
(in.)
D x E x F
MTG (G)
SCREW SIZE
WHT. (lbs.)
FIGURE
I-101/
I-101WL
1.0
3.0x2.0x1.5
3.5xN/Ax4.75
.18 DIA (2)
#6*
2
I-102/
I-102WL
2.5
4.0x2.88x1.81
4.38x2.12x5.31
.18 DIA (4)
#6*
2
I-105/
I-105WL
5.0
4.0x2.88x1.81
4.38x2.12x5.31
.18 DIA (4)
#6*
2
I-107/
I-107WL
7.5
4.75x4.75x2.35
5.25x3.5x6.25
.19 DIA (4)
#8*
3
I-115/
I-115WL
15.0
6.25x4.75x2.35
6.75x3.5x7.75
.19 DIA (4)
#8*
5
I-120/
I-120WL
20.0
7.75x4.75x2.35
8.25x3.5x9.0
.19 DIA (4)
#8*
7
I-130/
I-130WL
30.0
7.75x4.75x2.35
8.25x3.5x9.0
.19 DIA (4)
#8*
8
I-150
50.0
14.0x12.0x6.0
14.75x10.0xN/A
.31 DIA (4)
N/A
38
I-1100
100.0
20.0x16.0x9.0
21.25x10.0xN/A
.44 DIA (4)
N/A
75

240 VAC Models with Barrier Strip at Input & Output / with Wire Leads at Input & Output
MODEL
RATED OUTPUT
(AMPS)
CASE DIM. (in.)
A x B x C
MOUNTING FLANGE DIM. (in.)
D x E x F
MTG (G)
SCREW SIZE
WGHT. (lbs.)
FIGURE
I-201/
I-201WL
1.0
3.0x2.0x1.5
3.5xN/Ax4.75
.18 DIA (2)
#6*
2
I-202/
I-202WL
2.5
4.0x2.88x1.81
4.38x2.12x5.31
.18 DIA (4)
#6*
2
I-205/
I-205WL
5.0
4.0x2.88x1.81
4.38x2.12x5.31
.18 DIA (4)
#6*
2
I-207/
I-207WL
7.5
4.75x4.75x2.35
5.25x3.5x6.25
.19 DIA (4)
#8*
3
I-215/
I-215WL
15.0
7.75x4.75x2.35
8.25x3.5x9.0
.19 DIA (4)
#8*
5
I-220/
I-220WL
20.0
7.75x4.75x2.35
8.25x3.5x9.0
.19 DIA (4)
#8*
7
I-230/
I-230WL
30.0
7.75x4.75x2.35
8.25x3.5x9.0
.19 DIA (4)
#8*
8
I-250
50.0
14.0x12.0x6.0
14.75x10.0xN/A
.31 DIA (4)
N/A
38
I-2100
100.0
20.0x16.0x9.0
21.25x10.0xN/A
.44 DIA (4)
N/A
75
* N/A for WL Units

 

480 VAC Models Provided in NEMA 12 Enclosures
MODEL
RATED OUTPUT
(AMPS)
CASE DIM. (in.)
A x B x C
MOUNTING
FLANGE DIM.
(in.)
D x E x F
MTG (G)
SCREW SIZE
WGHT. (lbs.)
FIGURE
I-405
5.0
10.0x8.0x6.0
10.75x6.0x11.5xN/A
.31 DIA (4)
N/A
25
I-407
7.5
10.0x8.0x6.0
10.75x6.0x11.5xN/A
.31 DIA (4)
N/A
25
I-415
15.0
10.0x8.0x6.0
10.75x6.0x11.5xN/A
.31 DIA (4)
N/A
32
I-430
30.0
10.0x8.0x6.0
10.75x6.0x11.5xN/A
.31 DIA (4)
N/A
32
I-450
50.0
14.0x12.0x6.0
14.75x10.0x15.5xN/A
.31 DIA (4)
N/A
38
I-4100
100.0
20.0x16.0x9.0
21.25x10.0x22.5xN/A
.44 DIA (4)
N/A
85
I-4200
200.0
24.0x20.0x9.0
25.25x14.0x26.5xN/A
.44 DIA (4)
N/A
110
* N/A for WL Units

THREE-PHASE MODELS

120 / 208 VAC WYE or 240 VAC DELTA VAC Models
MODEL
RATED OUTPUT
(AMPS)
CASE DIM. (in.)
A x B x C
MOUNTING FLANGE DIM. (in.)
D x E x F
MTG (G)
TERMINAL SCREW SIZE
WGHT. (lbs.)
FIGURE
I-3-215
15.0
14.0x12.0x6.0
14.75x10.0x15.5
.31 DIA (4)
8-32 screw size
38
I-3-230
30.0
14.0x12.0x6.0
14.75x10.0x15.5
.31 DIA (4)
#16-4 AWG
38
I-3-250
50.0
20.0x16.0x9.0
21.25x10.0x22.5
.44 DIA (4)
6 AWG-I/O
85
I-3-2100
100.0
20.0x16.0x9.0
21.25x10.0x22.5
.44 DIA (4)
6 AWG-I/O
85
I-3-2200
200.0
24.0x20.0x9.0
25.25x14.0x26.5
.44 DIA (4)
6 AWG-250 MCM
110
I-3-2400
400.0
72.0x36.0x18.0
N/A
N/A
4 AWG-500 MCM
500
I-3-2600
600.0
72.0x36.0x18.0
N/A
N/A
4 AWG-500 MCM
500
I-3-21000
1000.0
100.0x46.0x28.0
N/A
N/A
500 MCM
850
I-3-21200
1200.0
100.0x46.0x28.0
N/A
N/A
500 MCM
850

 

277 / 480 VAC WYE or 480 VAC DELTA VAC Models
MODEL
RATED OUTPUT
(AMPS)
CASE DIM. (in.)
A x B x C
MOUNTING FLANGE DIM. (in.)
D x E x F
MTG (G)
TERMINAL SCREW SIZE
WGHT. (lbs.)
FIGURE
I-3-415
15.0
14.0x12.0x6.0
14.75x10.0x15.5
.31 DIA (4)
8-32 screw size
38
I-3-430
30.0
14.0x12.0x6.0
14.75x10.0x15.5
.31 DIA (4)
#16-4 AWG
38
I-3-450
50.0
20.0x16.0x9.0
21.25x10.0x22.5
.44 DIA (4)
6 AWG-I/O
85
I-3-4100
100.0
20.0x16.0x9.0
21.25x10.0x22.5
.44 DIA (4)
6 AWG-I/O
85
I-3-4200
200.0
24.0x20.0x9.0
25.25x14.0x26.5
.44 DIA (4)
6 AWG-250 MCM
110
I-3-4400
400.0
72.0x36.0x18.0
N/A
N/A
4 AWG-500 MCM
500
I-3-4600
600.0
72.0x36.0x18.0
N/A
N/A
4 AWG-500 MCM
500
I-3-41000
1000.0
100.0x46.0x28.0
N/A
N/A
500 MCM
850
I-3-41200
1200.0
100.0x46.0x28.0
N/A
N/A
500 MCM
850

 

PRINTED CIRCUIT BOARD: AC

120 VAC Models
MODEL
AMPERES
CASE DIM.
(L x W x H)
MTG
I-10PC
.25
1.30x1.00x.88
PCB
I-100PC
.50
2.63x1.88x.88
PCB

240 VAC Models
MODEL
AMPERES
CASE DIM.
(L x W x H)
MTG
I-20PC
.25
1.30x1.00x.88
PCB
I-200PC
.50
2.63x1.88x.88
PCB

PRINTED CIRCUIT BOARD: DC

35 VDC Model / 35 VDC with Wire Leads (WL)
MODEL
AMPERES
CASE DIM.
(L x W x H)
MTG
E-025PC
.25
1.30x1.00x.88
PCB
E-05PC
.50
1.30x1.00x.88
PCB
E-1PC
1.00
1.30x1.00x.88
PCB

BARRIER STRIPS

100 VDC Models with Barrier Strips at Input & Output
MODEL
RATED OUTPUT (AMPS)
CASE DIM. (in.)
A x B x C
MOUNTING FLANGE DIM. (in.)
D x E x F
MTG (G)
TERMINAL SCREW SIZE
WGHT. (lbs.)
FIGURE
E-1
1.0
4.0x2.88x1.81
4.38x2.12x5.31
.18 DIA (4)
#6*
2
E-2
2.5
4.0x2.88x1.81
4.38x2.12x5.31
.18 DIA (4)
#6*
2
E-5
5.0
4.0x2.88x1.81
4.38x2.12x5.31
.18 DIA (4)
#6*
2
E-7
7.5
4.0x2.88x1.81
4.38x2.12x5.31
.18 DIA (4)
#6*
2
E-15
15.0
8.50x7.50x3.10
7.06x6.19
#6 Screws
#8
E-30
30.0
8.50x7.50x3.10
7.06x6.19
#6 Screws
#8
E-50
50.0
14x12x6
14.75x10.0x15.5
.31 DIA (4)
6 AWG-I/O
38
E-100
100.0
20x16x9
21.25x14.0x26.5
.44 DIA (4)
6 AWG-I/O
85
Figure 1
Figure 2

 
Figure 3
Figure 4

Back to Ordering Information

 

 



Series-connected high-frequency noise filter available from 1/4 Amp PCB mount to 1,200 Amp 3-phase hard-wired. Ideal for those applications where internally generated noise and transients are of concern. Typical applications include industrial, medical, and telecommunications equipment. DC options available.
The original Active Tracking® Filter provides the industry’s best IEEE Category “A” protection (most commonly occurring transients). Typically reduces normal mode transients to +/– 5 volts
Non-degrading, series filter technology for total durability
Built to meet your unique requirements. Available in a multitude of voltage, phase, and packaging configurations
10-year warranty

Input Voltage

  120 VAC Models
0–150 VRMS
  240 VAC Models
0–275 VRMS
  480 VAC Models
0–520 VRMS
Line Frequency
50/60 Hz
(400 Hz Available)
Transient Attenuation Response Time
  Instantaneous
Mean Time Between Failure (MTBF)
  Greater Than 100,000 Hours (MIL 217F)
Packaging
Single-phase units through 30 Amps housed in black, high-impact plastic case, vacuum impregnated magnetics, epoxy encapsulated; single phase greater than 30 Amps, 480 VAC, and three phase units housed in NEMA 12 enclosures
Operating Temperature
  –40ºC to +45ºC
  Derate Linearly to 60% at +70ºC
Load Surge Current Rating
  10 mSec
5 x Nominal
  1 sec
3 x Nominal
  5 sec
2 x Nominal
Safety Approvals
  UL 1283 Listed or Recognized
  CSA
Typical Islatrol® Test Results
 
IEEE Category A Ringwave 6 kV, 200A, 100 kHz
IEEE Category B Ringwave 6 kV, 500A, 100 kHz
 
Normal Mode
Normal Mode
I-100
6.0
6.2
I-101
5.5
6.2
I-102
3.6
3.8
I-105
3.6